topology2: sof-mtl-rt5650: add SSP FMT 24 support#26
topology2: sof-mtl-rt5650: add SSP FMT 24 support#26
Conversation
c60bff8 to
d04390c
Compare
|
alsatplg -V refer to the SDW PR thesofproject#8359 to add the FMT_24 bit support on SSP. The logs has applied the PR here to set the out_valid_bit_depth, but the topology configuration doesn't take effect. [ 64.762791] sof-audio-pci-intel-mtl 0000:00:1f.3: widget name: dai-copier.SSP.SSP0-Codec.playback, id: 27
|
2b9b290 to
d7e4c97
Compare
d97933a to
6ec5ae7
Compare
Replace whitespaces with tabs. Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Replace whitespaces with tabs. Signed-off-by: Mac Chiang <mac.chiang@intel.com>
The CHAIN_DMA has been replaced with HDMI_USE_CHAIN_DMA, which was already enabled by default on iDisplay HDAudio codec in hdmi-default.conf. Signed-off-by: Mac Chiang <mac.chiang@intel.com>
All topologies are built in parallel. The same name will lead to file overrides. Therefore, correct to use the respective file names properly. Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Use 24 bits format on playback and capture pipelines if codec needs, e.g. RT5650 HS/SPK codec. Signed-off-by: Mac Chiang <mac.chiang@intel.com>
b289622 to
7c1d274
Compare
use 24 bit format on playback and capture pipelines if codec needs, e.g. RT5650 HS/SPK codec.